Need help?Do you have a question about the Sharp PN-V600A and is the answer not in the manual?
General| Brightness | 700 cd/m² |
|---|---|
| Contrast Ratio | 4000:1 |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Screen Size | 60 inch |
| Resolution | 1920 x 1080 |
| Response Time | 6 ms |
| Connectivity | HDMI, DVI-D, DisplayPort, VGA, RS-232C |
| Viewing Angle | 178° |
Important safety and usage information, including recording product details.
Reduce risk of fire or electric shock, do not expose to moisture.
Do not open covers, refer servicing to qualified personnel.
For indoor use only, requires VESA-compliant bracket and professional installation.
Instructions for connecting HDMI, DVI-D, D-sub, and audio input terminals.
Instructions for safely connecting the power cord to the monitor and power outlet.
Procedure for turning the main power on and off using the main power switch.
How to turn the monitor on and off using the power button on the remote or unit.
How to select the desired input source (PC, HDMI, DVI, etc.) for display.
Guide on how to access and navigate the monitor's on-screen menu system.
Adjustments for Clock, Phase, Position, Size, Resolution, and Reset.
Controls for Brightness, Contrast, Color, Sharpness, and White Balance.
Using automatic adjustment for PC inputs and accessing adjustment patterns.
How to reset settings to factory defaults, including different reset methods.
Disabling operations using buttons or remote control for security.
Connecting the monitor to a PC using RS-232C for control.
Setting communication parameters and understanding command formats for RS-232C.
Understanding correct and error response codes for RS-232C commands.
How to assign ID numbers to monitors for individual control in a daisy chain.
Examples of using IDST and IDSL commands for setting and selecting monitor IDs.
Using IDLK and IDCK commands for locking and checking monitor IDs.
Controlling multiple monitors simultaneously without assigning individual IDs.
Guide on how to read the RS-232C command table and its parameters.
Commands for controlling power status and selecting input modes.
Commands for Clock, Phase, Size, Resolution, and Reset settings.
Commands for Analog Gain/Offset, Contrast, Black Level, Tint, Colors, Sharpness.
Commands for Flesh Tone, 3D-NR, MPEG-NR, CMS, Color Mode, and White Balance.
Configuring IP address, subnet mask, and gateway for LAN connection.
Steps to resolve problems related to no picture, no sound, or reversed audio.
Explains the meaning of the power LED flashing red and green alternately (temperature alerts).
Detailed technical specifications for the PN-V600A LCD monitor.
To Next Page
