Sharp PN-Y555 - Setting the USB Flash Drive Cover; Affixing the Stand Hole Protection Covers

15
E
Afxing the Stand Hole Protection Covers
Setting the USB ash drive cover
1. Insert the USB ash drive into the USB port.
USB port
2. Attach the USB ash drive cover and secure with the
provided screw.
USB flash drive
cover screw
TIPS
• If the USB ash drive will be attached, use a USB ash drive with dimensions no greater than 1-15/16 inch (50 mm) (L) ×
13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H).
After installing the monitor, afx the stand hole protection
covers as necessary.
1. Peel off the backing sheet and afx the cover on the
monitor.