Sharp PN-Y555 - Playing the Files in a USB Flash Drive; Auto Playback; Playing Files; Remote Control Unit

21
E
A USB ash drive can be inserted in the monitor to display
images, videos, and music in the USB ash drive on the
monitor. For information on USB ash drive, see page 12.
Auto playback
The image les or video les in a USB ash drive can be
automatically played.
Create a folder with the name “autoplay” in the top level of the
USB ash drive.
Files in the “autoplay” folder that meet the criteria below play
automatically. (Supported formats and le names are different
from other playback.)
Format
Image les
: *.jpg *
1
or
Video les : *.wmv *
1
File name
001.jpg - 030.jpg *
2
or
001.wmv - 030.wmv *
2
(Files are played by number in ascending
order. If a number is missing in the
sequence, that number is skipped.)
Number of les Up to 30.
*1 For details, see “Supported formats” at right.
*2 File extension must be in lowercase.
Caution
• Mixed playback of image les and video les is not
possible. To display a mix of image les and video les, see
"SCHEDULE" (see page 30).
TIPS
• During auto play, it is better to turn the power ON/OFF using
the remote control unit. When the power is turned ON/OFF
using the main power switch, it takes a longer time until
auto play is started. It also takes a longer time for playback
to start from STANDBY MODE and LOW POWER.
n
Preparations
Set the type of les for auto play.
1.
Change an input mode to other than [USB]. (See page 19.)
2. Press
MENU
and select SETUP with or .
3. Press
ENTER
and select AUTO PLAY with or .
4.
Press
ENTER
and select PHOTO or MOVIE with or .
5. Press
ENTER
.
6. Press
MENU
.
n
Auto playback of les
1. Connect a USB ash drive (see page 12) and turn the
power ON. You can connect a USB ash drive (see
page 12) after turning the power ON.
TIPS
• Auto play will not start if a folder, le format, or le name
indicated in “Auto playback” is not correctly set, and if AUTO
PLAY is not correctly set in the monitor settings menu.
n
To stop auto play
1. Press
INPUT
.
Playing les
You can play the specied image/video/ audio les in a USB
ash drive.
1. Insert the USB ash drive into a USB port on the
monitor. (See page 12.)
2. Change an input mode to [USB]. (See page 19.)
3. Select the les to be played, and the play method. (See
page 22.)
n
Supported formats
The types of les that can be played in USB ash drive are as
follows:
The operation of formats not indicated in the table is not guaranteed.
Image les
Extension Display capability
*.jpg (*.jpeg) *
1
Size <= 10000 x 10000
Color mode= 444, 422
*.png
4096x3072 4bit, 2730x2500 8bit
2048x1536 16bit, 1500x1200 32bit
*1 Progressive JPEG les are supported.
Audio les
Extension Video coding Audio coding
*.mp3 - MPEG-1, 2, 2.5 L3
*.wma - WMA, WMA Pro
Video les
Extension Video coding Audio coding
*.wmv WMV9 WMA
*.mp4
H.264 BP, MP, HP,
MPEG4 SP, ASP,
XVID
MP3, ADPCM, AAC
*.ts
MPEG-2, H.264 BP,
MP, HP, VC1
AC3, AAC, MP3, DD+,
HE-AAC
• In some cases it may not be possible to play the above les.
• A maximum of 32 alphanumeric characters can be used for
folder name and le name. A le name or folder name may
not display correctly if a space, hyphen (-), or underbar (_)
is used.
• When le names or folder names are long, some
characters may not appear in the list screen.
• Do not use a le that is over 2 GB.
• During playback and when a list is displayed, the remote
control and some buttons may not respond when operated.
This is caused by the heavy image processing load and is
not due to a product failure or problem.
• Operation is not assured when a non-supported format is
used. The following types of problems may occur:
- Abnormal play speed
- Operations cannot be performed during playback
- Playback stops. The player application restarts.
• When a video le cannot be played, “Unsupported le”
appears. With some les, “Video resolution not supported”
or “Audio format not supported” may appear.
Playing the Files in a USB Flash Drive