3
ENGLISH
Before using your product, read all safety instructions. For full instructions
please refer to the user guide available to download from the website www.
sharpconsumer.eu.
Panels & Controls
TOP VIEW
1. 6.3mm MIC JACK
2. 6.3mm GUITAR JACK
3. 3.5mm AUX IN JACK
4. AUDIO-1(BT/USB/AUX MODE)
5. BLUETOOTH CONNECTION BUTTON
6. A-VOLUME KNOB
7.
STANDBY BUTTON
8.
PREVIOUS BUTTON
9. POWER INDICATOR
10. EQ SLIDER-A / EQ SLIDER-B
11. USB PORT FOR PLAYBACK
12. USB PORT FOR CHARGE
13. AUDIO-2 (MIC/GUITAR/AUX MODE)
14. LIGHT BUTTON
15. SUPER BASS BUTTON
16. B-VOLUME KNOB
17.
PLAY/PAUSE BUTTON
18.
NEXT BUTTON
19. CHARGE INDICATOR
20. DISPLAY SCREEN
BACK VIEW
1. HANDLE
2. MIC HOLDER
3. POWER SOCKET
4. POWER SWITCH
OPERATION INSTRUCTION
BASIC FUNCTIONS
POWER ON/OFF YOUR UNIT
Select an appropriate power cord and plug it into the POWER SOCKET.
Switch the POWER SWITCH to ON. The speaker will turn to Standby mode
automatically, and the POWER INDICATOR will be lit up in red color.
TURNING THE UNIT ON/OFF
Press the STANDBY button to turn ON or OFF the unit.
SETTING THE PLAYBACK MODE
To change the playback modes, rotate the AUDIO-1 KNOB to choose: BT,
AUX, USB, OFF.
SETTING THE INPUT MODE
Rotate the AUDIO-2 KNOB to choose: MIC/GUITAR, AUX.
ADJUST THE VOLUME
1. Rotate the A-VOLUME KNOB to increase or decrease the music volume.
2. Rotate the B-VOLUME KNOB to adjust the microphone, guitar volume.
3. When AUDIO-1 and AUDIO-2 are both set to AUX, the volume can be
adjusted by A-VOLUME and B-VOLUME.
BLUETOOTH OPERATION
1. Rotate the AUDIO-1 knob to BT mode to enter Bluetooth mode, “ - bt -
” will be lit up and ash on the display screen.
2. Turn on the Bluetooth function on your device, scan “SHARP PS-940”
and connect. Input the password 0000 if required.
3. Once successfully connected, there will be a prompt sound and “ - bt - ”
will stop ashing.
4. Adjust the EQ e ect by sliding the EQ SLIDER-A.
5. Rotate the A-VOLUME knob or adjust the volume on the external
device to increase or decrease the music volume to your desired level.
6. Control the playback with your audio device.
7. Press the BLUETOOTH CONNECTION button to disconnect the
bluetooth connection.
USB OPERATION
This unit provides two USB ports, one for playback, and another for
charging.
1. Set AUDIO-1 to USB mode. “USb” will be shown on the display.
2. Plug the USB memory stick to the USB PLAYBACK PORT on the unit.
Playback will start automatically from track 01.
3. To pause the playback, press the PLAY/PAUSE button on the top panel
of the unit. Press this button again to resume the playback.
4. To select a desired track, press the PREVIOUS or NEXT button
respectively during playing until the desired track appears on the
display. The unit will start to play automatically.
MIC/GUITAR OPERATION
1. Set the AUDIO-2 to MIC/GUITAR mode.
2. Connect your microphone/guitar to the MIC or GUITAR JACK.
3. Rotate the B-VOLUME knob to adjust the microphone/guitar volume.
4. Use the EQ SLIDER-B to adjust your favor sound e ect.
NOTES: The EQ SLIDER-B cannot work if the AUDIO-2 is set to AUX mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
