Sharp Q5000 Series User Manual

8
STEP 3. Establish a Network Connection
1. Press the
[ ]
button on the remote control, press
[
˅
]
button to select
Settings
and then press
[
OK
]
to enter the Settings menu
.
2. Select
Network
→
NetworkConguration
.
TV JACK
Modem Cabl
eL
AN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establish a wired network connection
AutomaticallyobtainanIPaddress
1. Select
Wired LAN
. The TV will automatically obtain an IP address and connect to the network.
 NOTE:ThedefaultoptionofIPSettingsModeisDHCP.
2. If the connection fails then "
Disconnected
" will display for the Ethernet status. Retry or enter the
IP Settings
, select
Manual
to input
the information again.
ManuallyentertheIPaddress
1. Select
Manual
.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Next, select
Save
.

Sharp Q5000 Series Specifications

General

Brand	Sharp
Model	Q5000 Series
Category	LCD TV
Language	English