Why Sharp QW-HX13F47EI-EU programme does not start?
The programme on your Sharp Dishwasher might not be starting due to several reasons: it's not plugged in (plug it in), not switched on (press the On/Off button), a blown fuse (check indoor fuses), the water inlet tap is closed (turn it on), the door is open (close it), or the water inlet hose and machine filters are clogged (check and clear them).
What to do if water remains inside Sharp QW-HX13F47EI-EU?
If water remains inside your Sharp Dishwasher, the drain hose might be clogged or twisted (check, clean, or untwist it), the filters could be clogged (clean them), or the programme might not be finished yet (wait until it is).
Why whitish stains remain on dishes after washing in Sharp QW-HX13F47EI-EU Dishwasher?
Whitish stains on dishes after washing in your Sharp Dishwasher can be due to not using enough detergent (use the correct amount), the rinse aid dosage or water softener setting being too low (increase them), a high water hardness level (increase the water softener level and add salt), or the salt compartment cap not being closed properly (check the cap).
Why Sharp QW-HX13F47EI-EU Dishwasher dishes do not dry?
If dishes are not drying in your Sharp Dishwasher, it may be because a drying option is not selected (select a programme with a drying option) or the rinse aid dosage is set too low (increase the rinse aid dosage setting).
Why does my Sharp QW-HX13F47EI-EU stop during washing?
Your Sharp Dishwasher may stop during washing due to a power failure (check mains power) or a water inlet failure (check the water tap).
How to fix shaking and hitting noises during Sharp QW-HX13F47EI-EU wash?
Shaking and hitting noises during a wash operation in your Sharp Dishwasher often mean the spray arm is hitting dishes in the lower basket. To resolve this, move or remove the items that are blocking the spray arm.
Why detergent remains in the detergent compartment of Sharp QW-HX13F47EI-EU?
If detergent remains in the compartment of your Sharp Dishwasher, it may be because the detergent was added when the compartment was wet. Ensure the detergent compartment is dry before use.
What to do if there is insufficient water in Sharp Dishwasher?
If there is insufficient water in your Sharp Dishwasher, make sure the water inlet tap is open and water is flowing. Also, separate the inlet hose from the tap and clean the filter of the hose.
What to do if Sharp QW-HX13F47EI-EU Dishwasher has continuous water input?
If your Sharp Dishwasher has continuous water input, close the tap.
What to do in case of overflow in Sharp Dishwasher?
In case of an overflow in your Sharp Dishwasher, unplug the machine and close the tap.
General| Appliance Placement | Freestanding |
|---|---|
| Energy Efficiency Class | E |
| Noise Level | 47 dB |
| Dimensions (H x W x D) | 85 x 60 x 59.8 cm |
| Built-in Display | Yes |
| Display Type | LED |
| Inlet Hose Length | 1.5 m |
| Cord Length | 1.5 m |
| Delayed Start Timer | Yes |
| AquaStop Function | Yes |
| Child Lock | Yes |
| AC Input Voltage | 220 - 240 V |
| Weight | 47.5 kg |
| Product Size | Full-size |
| Place Settings | 13 place settings |
| AC Input Frequency | 50 Hz |
| Width | 600 mm |
| Delayed Start | 3-9 hours |
To Next Page