EN - 22
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
P1 P2 1/2 3h 6h
Water inlet system
failure
Make sure the water inlet tap is open
and water is flowing.
Separate the inlet hose from the tap and
clean the filter of the hose.
Contact for service if the error continues.
Pressure system
failure
Contact for service.
Continuous water
input
Close the tap and contact for service.
Inability to
discharge water
Water discharge hose and filters may
be clogged.
Cancel the program.
If the error continues, contact for
service.
Contact for service.
Faulty heater Contact for service.
Overflow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic
card
Contact for service.
Overheating Contact for service.
Faulty heater
sensor
Contact for service.
High voltage
failure
Contact for service.
Low voltage failure Contact for service.
To Next Page
Loading...
