How to fix dishes not drying in Sharp Dishwasher?
If your dishes aren't drying in your Sharp Dishwasher, it could be because the drying option isn't selected; make sure to choose a program with a drying option. Also, the rinse aid dosage might be set too low, so increase the rinse aid dosage setting.
Why does detergent remain in the detergent compartment of my Sharp QW-NI14I47EX-EN?
If detergent remains in the detergent compartment of your Sharp Dishwasher, it's likely because the detergent was added when the compartment was wet. Ensure the detergent compartment is dry before adding detergent.
Why does my Sharp QW-NI14I47EX-EN leave whitish stains on dishes?
If you notice whitish stains on your dishes after a wash in your Sharp Dishwasher, there are several potential reasons. It could be due to not using enough detergent, so ensure you're using the correct amount as instructed. The rinse aid dosage or water softener setting might be too low; try increasing these levels. Also, a high water hardness level can cause this, so increase the water softener level and add salt. Finally, make sure the salt compartment cap is closed properly to prevent issues.
What to do if rust stains form on the dishes in my Sharp QW-NI14I47EX-EN Dishwasher?
If you're seeing rust stains on dishes washed in your Sharp Dishwasher, several factors could be at play. First, the stainless-steel quality of your dishes might be insufficient, so try using only dishwasher-proof sets. A high level of salt in the wash water could also be the culprit; adjust the water hardness level using the water hardness table. Ensure the salt compartment cap is closed properly. Avoid spilling too much salt while filling by using a funnel. Finally, a poor mains grounding might be the cause; in this case, consult a qualified electrician immediately.
Provides essential safety guidelines for operating the appliance and handling packaging materials.
Details crucial precautions and procedures for the safe installation of the dishwasher.
Outlines important safety measures to follow while the dishwasher is in operation.
Guidance on selecting a suitable and safe location for placing the dishwasher.
Instructions for connecting the dishwasher to the water supply, including filter recommendations.
Details on using the correct water inlet hose and ensuring proper connection and pressure.
Instructions for safely connecting the dishwasher to the electrical supply, including voltage and grounding.
Lists key technical data such as capacity, dimensions, weight, power, and water pressure.
Steps to follow before the initial operation, including checking specifications and filling compartments.
Explains the importance of dishwasher salt for water softening and preventing limescale buildup.
Guidelines on selecting and using the correct type and amount of detergent for optimal cleaning.
Guidelines for optimal loading to ensure efficient washing and drying, including pre-rinsing and full loads.
General| Category | Dishwasher |
|---|---|
| Model | QW-NI14I47EX-EN |
| Type | Freestanding |
| Capacity | 14 place settings |
| Water Consumption per Cycle | 9.5 L |
| Number of Programs | 8 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Cutlery Basket | Yes |
| Adjustable Upper Basket | Yes |
| Delay start | Yes, up to 24 hours |
| Child lock | Yes |
| Half load | Yes |
To Next Page