What to do if my Sharp QW-NI1EI45EX-EU Dishwasher is unable to discharge water?
If your Sharp Dishwasher isn't discharging water, the water discharge hose and filters may be clogged. To resolve this, first cancel the current program. If the problem persists, it's recommended to contact for service.
How to fix Sharp QW-NI1EI45EX-EU Dishwasher water inlet system failure?
If you're experiencing a water inlet system failure with your Sharp Dishwasher, ensure that the water inlet tap is fully open and that water is flowing properly. Also, try separating the inlet hose from the tap and cleaning the filter of the hose. If the error continues after these steps, contact for service.
What to do if Sharp QW-NI1EI45EX-EU has overflow?
If your Sharp Dishwasher is experiencing an overflow, unplug the machine and close the tap immediately. After these steps, contact for service.
What to do if Sharp QW-NI1EI45EX-EU Dishwasher has continuous water input?
If your Sharp Dishwasher is continuously taking in water, close the tap immediately and contact for service.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Product size | Full size (60 cm) |
| Control panel colour | Black |
| Built-in display | Yes |
| Display type | LED |
| Drying system | ActiveDry |
| Delayed start timer | Yes |
| Delayed start | Up to 24 hours |
| AquaStop function | Yes |
| Child lock | Yes |
| Upper basket adjustable height | Yes |
| Cutlery compartment type | Basket |
| Water fill | Cold |
| Energy efficiency class | C |
| Water consumption per cycle | 9.5 L |
| Power consumption (off) | 0.5 W |
| Connected load | 1900 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Dimensions (H x W x D) | 845 x 598 x 600 mm |
| Width | 598 mm |
| Depth | 600 mm |
| Height | 845 mm |
| Weight | 54 kg |
| Half load | Yes |
| Inlet hose length | 1.5 m |
| Outlet hose length | 1.5 m |
| Washing programs | Eco, Intensive, Normal, Quick |
| Energy consumption per cycle | 0.93 kWh |
To Next Page