What to do if Sharp QW-NS14I49EX-EU Dishwasher dishes do not dry?
If your dishes aren't drying in your Sharp Dishwasher, make sure you've selected a programme with a drying option. Also, the rinse aid dosage might be set too low; try increasing the rinse aid dosage setting.
Why does detergent remain in the detergent compartment of my Sharp QW-NS14I49EX-EU Dishwasher?
If detergent remains in the detergent compartment of your Sharp Dishwasher, ensure the detergent compartment is dry before adding detergent.
Why does my Sharp QW-NS14I49EX-EU Dishwasher have rust stains on the dishes?
Rust stains on your Sharp Dishwasher dishes can occur for several reasons. It might be due to insufficient stainless-steel quality of your dishes, so ensure you're using only dishwasher-proof sets. High salt levels in the wash water can also cause rust; adjust the water hardness level using the water hardness table. Check that the salt compartment cap is properly closed. Avoid spilling too much salt when filling by using a funnel. A poor mains grounding could also be the cause, in which case you should consult a qualified electrician immediately.
General| Type | Freestanding |
|---|---|
| Noise level | 44 dB |
| Door colour | Stainless steel |
| Control panel colour | Black |
| Built-in display | Yes |
| Display type | LED |
| Inlet hose length | 1.5 m |
| Outlet hose length | 1.5 m |
| Cord length | 1.5 m |
| Delayed start timer | Yes |
| AquaStop function | Yes |
| Child lock | Yes |
| Adjustable feet | Yes |
| Upper basket adjustable height | Yes |
| Cutlery compartment type | Basket |
| Salt indicator | Yes |
| Rinse aid indicator | Yes |
| Connected load | 2100 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Width | 600 mm |
| Depth | 600 mm |
| Place settings | 14 |
| Washing programs | Eco, Intensive |
| Delayed start | 3-9 hours |
| Power consumption (off) | 0.5 W |
Read instructions, check packaging, supervise children, keep away from detergents.
Place machine in suitable area, consider connections, allow space for cleaning.
Recommend fitting a filter for water inlet supply to prevent damage.
Use new hose, run water through it, connect directly to tap, check for leaks.
Connect to grounded outlet, ensure correct voltage and earthing.
Lists components like upper basket, spray arms, cutlery basket, control panel.
Details capacity, dimensions, weight, voltage, power, and water pressure.
Check specifications, remove packaging, set water softener, fill rinse aid.
Explains the need for salt for soft water to prevent residues and improve performance.
Instructions on opening the compartment, filling with salt and water, and replacing the cap.
How to open the detergent dispenser, pour detergent, and close the lid.
Advice on using combined detergents and when not to use them for short programs.
Explains rinse aid function for drying and preventing spots/stains.
How to fill the rinse aid compartment and adjust the dosage level.
Remove residue, start with full load, do not overload or place dishes in wrong basket.
Shows how to load lower and upper baskets, including folding racks.
Steps to change a program while the machine is operating.
Steps to cancel a program while the machine is operating.
Instructions on how to switch off the machine using buttons or power.
Steps to adjust the buzzer sound level.
Instructions to activate or deactivate the power saving mode.
Instructions on cleaning micro and coarse filters, and metal filter.
How to clean spray arms, check for clogs, and remove/refit the upper spray arm.
How to clean the drain pump, including safety precautions.
To Next Page