Why won't my Sharp QW-NS24F44DI-DE Dishwasher start?
Several factors can prevent your Sharp Dishwasher from starting. Ensure the dishwasher is plugged in and switched on using the On/Off button. Check your indoor fuses and make sure the water inlet tap is open. Also, verify that the dishwasher door is fully closed and that the water inlet hose and machine filters are not clogged.
Why is there water remaining inside my Sharp Dishwasher?
If water remains inside your Sharp Dishwasher, the drain hose might be clogged or twisted; inspect and clean or untwist it. Clogged filters could also be the cause, so clean them thoroughly. Alternatively, the programme might not be finished yet, so allow it to complete its cycle.
What to do if my Sharp QW-NS24F44DI-DE Dishwasher leaves partial food wastes on the dishes?
If your Sharp Dishwasher leaves partial food wastes on dishes, it could be due to several reasons. Avoid overloading the baskets and ensure dishes aren't leaning against each other; refer to the loading instructions. Use the correct amount of detergent as indicated in the programme table, and select the appropriate wash programme. Also, check if the spray arms are clogged with food waste and clean them with thin objects. Finally, ensure the filters and water drain pump are not clogged and are correctly fitted.
What to do if my Sharp Dishwasher leaves whitish stains on dishes?
If you notice whitish stains on your dishes after a wash in your Sharp Dishwasher, it could be due to several reasons: * Not using enough detergent. Refer to the programme table for the correct amount. * Rinse aid dosage and/or water softener setting set too low. Increase the rinse aid and/or water softener level. * High water hardness level. Increase the water softener level and add salt. * Salt compartment cap not closed properly. Ensure the salt compartment cap is closed properly.
How to fix rust stains on dishes in my Sharp QW-NS24F44DI-DE?
Rust stains on dishes from your Sharp Dishwasher can be caused by several factors. Ensure you are using dishwasher-proof sets, as the stainless-steel quality of some dishes may be insufficient. Adjust the water hardness level using the water hardness table if there's a high level of salt in the wash water. Also, check that the salt compartment cap is properly closed and use a funnel when filling the salt compartment to avoid spillage. For a poor mains grounding, consult a qualified electrician.
Why won't my Sharp QW-NS24F44DI-DE Dishwasher dishes dry?
If your dishes aren't drying in your Sharp Dishwasher, ensure you've selected a programme with a drying option. Also, check that the rinse aid dosage isn't set too low and increase the rinse aid dosage setting if needed.
What to do if my Sharp QW-NS24F44DI-DE Dishwasher stops during washing?
If your Sharp Dishwasher stops mid-cycle, check the mains power supply. Also, verify that the water tap is on, ensuring a consistent water inlet.
Why is my Sharp Dishwasher making shaking and hitting noises?
If you hear shaking and hitting noises during a wash cycle in your Sharp Dishwasher, the spray arm might be hitting dishes in the lower basket. Try moving or removing any items that are blocking the spray arm.
Why does detergent remain in the compartment of my Sharp Dishwasher?
If detergent remains in the detergent compartment of your Sharp Dishwasher, ensure the compartment is dry before adding detergent.
What to do for Sharp Dishwasher water inlet system failure?
For a Sharp Dishwasher water inlet system failure, make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues.
General| Category | Dishwasher |
|---|---|
| Model | QW-NS24F44DI-DE |
| Type | Freestanding |
| Size | Full-size |
| Place Settings | 14 |
| Energy Efficiency Class | D |
| Noise Level | 44 dB |
| Number of Programs | 6 |
| Delay Start | Yes |
| Child Lock | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Water Consumption per Cycle | 9.5 L |
To Next Page