EasyManuals Logo

Sharp R-21ATP User Manual

Sharp R-21ATP
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
6
The programme or check mode is cancelled when
any pads are not pressed for more than 3 min-
utes.
will appear on the display after the time
reaches zero. It will disappear when the oven door
is opened or the STOP/CLEAR pad is pressed.
When you first connect the microwave oven to an
electrical socket, the digital display will show
.
Key pad entries can only be made when the door
is closed.
EFORE OPERATION
B
The operation of the oven is controlled by pressing the appropriate pads on the control panel.
A signal should be heard each time you press the control panel.
SOUND SETTING
There is a choice of 2 different sounds or no
sound on your oven.
To set a signal, touch the SET pad twice within 2
seconds and then touch the SIGNAL pad continu-
ously until you hear the tone required.
STOPPING THE OVEN
If you want to stop the oven during cooking, press
the STOP/CLEAR pad once or open the door (ex-
cept memory cooking).
To start the oven again, close the door and press
the START pad within 1 minute.
If you open the door during memory cooking, the
programme is cancelled.
If you want to cancel a programme during cook-
ing, press the STOP/CLEAR pad twice.
If you want to clear a mistake during program-
ming, press the STOP/CLEAR pad once.
R21AT,01-07 07.6.9, 10:28 AM6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp R-21ATP and is the answer not in the manual?

Sharp R-21ATP Specifications

General IconGeneral
BrandSharp
ModelR-21ATP
CategoryMicrowave Oven
LanguageEnglish

Related product manuals