Sharp R-21LCFS

CHECK
NO.
X2
CHECK
NO.
CHECK
NO.
NO.
CHECK
NO.
CHECK
CHECK
CHECK
CHECK
1 Touch CHECK
pad.
2 Touch number
pad.
Memory check
You can check the information programmed into
each memory.
Checking time and power level
* Suppose you want to know the information pro-
grammed into memory 1, programmed for 4 minutes
at 60% for the 1st stage and 2 minutes at 30% at
the 2nd stage.
Procedure Display
Checking magnification
* Suppose you want to know the magnification fac-
tor for double quantity in memory 1.
CHECK
After about 1 sec.
REPEAT
Note: 1. To cancel memory check, touch the
CHECK pad.
2. When
is displayed at Step 1, the
memory is not set.
3. (For R-21LTF)
If you want to check memory 11-20, touch
the desired number pad twice within 1
second.
Procedure Display
CHECK
Note: 1. To cancel memory check, touch the CHECK
pad.
2. The magnification factor 1.7 for the DOUBLE
QUANTITY is stored in all memories when
the oven is shipped.
1 Touch CHECK pad.
2 Touch DOUBLE
QUANTITY pad.
3 Touch number pad.
NO. X2
CHECK
X2
CHECK
After about 1 sec.
DOUBLE
QUANTITY
1
1
10