1. Press the AUTO COOK/DEFROST button once,
the display will appear as shown.
The menu can be chosen by pressing the AUTO
COOK/DEFROST button until the desired menu
number is displayed. See page 10 “AUTO
COOK/DEFROST chart”.
2. The weight or quantity of the food can be input by
rotating the TIME/WEIGHT dial until the desired
weight/quantity is displayed.
- Enter the weight of the food only. Do not
include the weight of the container.
- For food weighing more or less than weights/
quantities given in the AUTO
COOK/DEFROST chart, use
manual programmes. For best results, follow
the defrosting chart and the cooking charts.
See pages 20-23.
3. To start cooking press AUTO MINUTE/START
button.
When action is required (e.g. to turn food over) the
oven stops and the audible signals sound,
remaining cooking time and any indicator will
flash on the display. To continue cooking, press
the AUTO MINUTE/START button.
The final temperature will vary according to the
initial food temperature. Check food is piping hot
after cooking. If necessary, you can extend the
cooking time and change the power level.
9
AUTOMATIC OPERATION
TIME/WEIGHT dial
AUTO MINUTE/START button
Example:
To cook Roast Beef 1.5kg (AC-1)
Enter the weight by rotating
the TIME/WEIGHT dial
clockwise.
x1
x1
Press the AUTO MINUTE
/START button.
Select the menu required
by pressing the AUTO
COOK/DEFROST button.
x1
x1
To Next Page
Loading...
Need help?
General
