E – 5
Getting Started
Step
Procedure Pad Order Display
1
Plug the oven into a power point and
switch on the power.
Flashing eights
Open the door.
The oven lamp comes on.
Close the oven door.
Press the STOP/CLEAR pad so that the
oven beeps.
as above
Clock Setting
This is a 12 hour clock.
* To enter the present time of day 11:34 (AM or PM).
BEFORE OPERATING
To Cancel a Programme During Cooking
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Press the STOP/CLEAR pad twice.
Step
Procedure Pad Order Display
Press the TIMER/CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
3
Press the TIMER/CLOCK pad again.
The dots (:) will flash on
and off.
If you attempt to enter an incorrect clock time (Ex. 13:45), will appear in the display.
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
2
Only the dots will remain.
3
1134
To Next Page
Loading...
Need help?
General
