Sharp R-340D User Manual

A33219,中近東R340D O/M
E-6
Step
Procedure Pad Order Display
1
Flashing eights
Clock Setting
Step
Procedure Pad Order Display
Press the TIMER/CLOCK pad.
1
* To enter the present time of day 11:34 (AM or PM).
BEFORE OPERATING
Enter the correct time of day by pressing
the numbers in sequence.
2
3
Getting Started
Only the dots will remain.
2
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Ex. 13:45), will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long
as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Press the STOP/CLEAR pad twice.
Stop/Clear
To Cancel a Programme During Cooking
Press the TIMER/CLOCK pad again.
The dots (:) will flash on and
off.
Press the STOP/CLEAR pad so that the
oven beeps.
Plug the oven into a power point.
Ensure the oven door is closed.

Sharp R-340D Specifications

Power

AC line voltage	Single phase 220-240V, 50Hz
AC power required	1.55 kW
output power	1000 W
microwave frequency	2450 MHz

Capacity

oven capacity	34 Litre
cooking uniformity	Turntable (335mm tray) system

Weight and Dimensions

outside dimensions	520mm(W) x 302mm(H) x 436mm(D)
cavity dimensions	374mm(W) x 227mm(H) x 399mm(D)
weight	Approx. 17 kg