Sharp R-42B User Manual

5
Power Level Press the POWER LEVEL
key
Display
(Percentage)
• If “P0” is selected, the oven will work with the
fan but no power. You can use this level to
remove the odour.
HIGH
x1 P100
x2 P90
MEDIUM HIGH
x3 P80
x4 P70
MEDIUM
x5 P60
x6 P50
MEDIUM LOW
(DEFROST)
x7 P40
x8 P30
LOW
x9 P20
x10 P10
x11 P0
Generally the following recommendations apply:
- (HIGH) used for fast cooking or reheating
e.g. for casseroles, hot beverages, vegetables etc.
- (MEDIUM HIGH) used for longer cooking of
dense foods such as roast joints, meat loaf and plated
meals, also for sensitive dishes such as sponge cakes.
At this reduced setting, the food will cook evenly
without over cooking at the sides.
- (MEDIUM) for dense foods which require a
long cooking time when cooked conventionally, e.g.
beef casserole, it is advisable to use this power setting
to ensure the meat will be tender.
- (MEDIUM LOW) to defrost, select this
power setting, to ensure that the dish defrosts evenly.
This setting is also ideal for simmering rice, pasta,
dumplings and cooking egg custard.
- (LOW) For gentle defrosting, e.g. cream
gateaux or pastry.
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode.
1. Press the CLOCK button once. The hour  gure will  ash and the clock indicator will illuminate.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.
3. Press the CLOCK button, the minute  gure will  ash.
4. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59.
5. Press the CLOCK button to confirm the time. The icon “:” of the digital time will  ash on the display and the
clock indicator will disappear.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will
show "0:00".
• To check the time of day during a cooking process, press the CLOCK button and the LED will display the time of
day for 2-3 seconds. This does
not a ect the cooking process.
• In the process of clock setting, if the STOP/CLEAR button is pressed, the oven will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show
"0:00" after the power is
reinstated. If this occurs during cooking, the programme will be erased, as will the
time of day.
P100/ P90
P60/ P50
P80/ P70
P40/ P30
P20/ P10
• Press the MICRO. POWER button once, P100
will be displayed and
at the same time the
microwave indicator and power level indicator
will illuminate on the display.
• Press MICRO. POWER or rotate the ENTRY
dial to change the power level until the display
indicates the desired level.
• Press the START/+30sec./ENTER button to
confirm the setting,
enter the cooking time
and then press the START/ +30sec./ENTER
button again to start the oven.
• To check the power level during cooking, press
the MICRO. POWER
button, the current power
level will be displayed for 3 seconds. The oven
will continue to count down although the
display
will show
the power level.
BEFORE OPERATION
SETTING THE CLOCK
MICROWAVE POWER LEVEL
Your oven has a 24 hour clock feature. To set the clock:

Sharp R-42B Specifications

General

Brand	Sharp
Model	R-42B
Category	Microwave Oven
Language	English