TO REPLACE THE MAINS PLUG
Make sure the terminal screws are tight and the cable
is held securely by the cable grip where it enters the
plug.
Like most appliances in your home, your oven must be
connected to a single phase 220-230V, 50Hz alternating
current supply.
If you do not make the proper electrical connections
you might damage the oven or injure yourself. Neither
SHARP nor the supplier will be liable if this happens.
WARNING: THIS APPLIANCE MUST BE EARTHED
If you have any doubts about your electrical
supply ask a quali ed electrician.
The wires in the mains cable are colour coded as
shown:
Green and yellow stripes = EARTH
Blue = NEUTRAL
Brown = LIVE
As the colours in the mains lead of your oven may not
correspond with the coloured marking identifying the
terminals in your plug, connect the wires as described:
•
The green and yellow wire to the plug terminal
marked E or
or coloured green or coloured
green and yellow.
•
The blue wire to the plug terminal marked N or
coloured black or coloured blue.
•
The brown wire to the plug terminal marked L or
coloured red or coloured brown.
Pusat Informasi Pelayanan Konsumen
Website:
Telephone:
www.sharp-indonesia.com
0 - 800 - 1225588 (Bebas Pulsa) / 0815 -8225599 (SMS)
To Next Page
Loading...
Need help?
General
