1
R-7A55(W)/(B)
R-7E45(W)/(B)
SHARP CORPORATION
OSAKA, JAPAN
FUNCTION OF IMPORTANT
COMPONENTS
SERVICING AND
TROUBLESHOOTING CHART
TEST PROCEDURE
GENERAL INFORMATION
APPEARANCE VIEW
OPERATING SEQUENCE
PRODUCT SPECIFICATIONS
GRILL AND CONVECTION
MICROWAVE OVEN
R-7A55(W)/ R-7A55(B)/R-7E45(W)/R-7E45(B)
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp. Service
engineers with Operation and Service Information.
It is recommended that service engineers carefully study the
entire text of this manual, so they will be qualified to render
satisfactory customer service.
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door latches and hinges are not defective.
(C) The door is not deformed or warped.
(D) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained
service engineers.
Note: All the parts marked "∆" on the parts list may cause
undue microwave exposure, by themselves, or when
they are damaged, loosened or removed.
WARNING
Note: The parts marked "*" are used in volt-
age more than 250V. (Parts List)
Anm: Delar märket med "*" har en spänning
överstigande 250V.
Huom: Huolto-ohjeeseen merkitty "tähdella"
osat joissa jännite on yli 250 V.
Bemerk: Deler som er merket "asterisk" er utsatt
for spenninger over 250V til jord.
Bemærk: "Dele mærket med stjerne benyttes med
højere spænding end 250 volt.
MICROWAVE MEASUREMENT
TEST DATA AT A GLANCE
WIRING DIAGRAM
PARTS LIST
COMPONENT
REPLACEMENT AND
ADJUSTMENT PROCEDURE
TOUCH CONTROL PANEL
SERVICE MANUAL
To Next Page
Loading...
Need help?
General
