If this o ccurs during co o king, the prog ramme will
be era sed. The time o f day will also be erased.
4. W hen yo u want to reset the time o f day, fo llo w the
abo ve example ag ain.
5. If you do not set the clo ck, press the STOP key
o nce will appear o n the display. W hen the
o peration o f the o ven is finished, will
reappear o n the display instead o f the time o f day.
6. If you set the cloc k, energy save mode do es
not wo rk.
x1
8
SETTING THE CLOCK
MICROWAVE POW ER LEVELS
There are two setting mo des: 1 2 hour clo ck and 2 4 ho ur cloc k.
Step 1 .
x1
1. To set the 1 2 ho ur clock, press the CLOCK
SETTING key o nce, as in Step 1 o ppo site.
2. To set the 2 4 ho ur clock, press the CLOCK
SETTING key twice, as in Step 2 o ppo site.
Step 2 .
x2
Example:
To set the 2 4 hour clo ck to 2 3 :3 5 :
x2
x2
x1
1 . Cho o se the 2 4 hour
clock by pressing the
CLOCK SETTING key
twice.
3 . Change fro m hours to mins
by pressing the CLOCK
SETTING key o nce.
Check the display.
4 . Set the minutes:
Press 10 MIN key three times.
Press 1 M IN key five times.
2 . Set the ho urs:
Press the 10 MIN key twice.
Press the 1 MIN key three times.
5 . Start the clo ck.
NOTES:
1. Press the STOP key if you make a mistake during
pro gramming.
2. If the o ven is in co o king o r minute timer mode and
yo u wish to kno w the time o f day, to uch the
CLOCK SETTING key. As lo ng as yo ur finger is
to uching the key, the time o f day will be displayed.
3. If the electrical po wer supply to yo ur microwave
o ven is interrupted, plug in the o ven ag ain, then
o pen and clo se the do o r. The display will show
“ EN ERG Y SAVE MO DE” .
Yo ur o ven has 5 po wer levels. To choo se the po wer level, fo llo w the advice g iven in the co o kbo o k.
900 WATT = 100 % output
630 WATT = 70 % output
450 WATT = 50 % output
• To set the po wer, to uch the MICROWAVEPOWER LEVEL key until the desired level is displayed.
• If the MICROWAVE POW ER LEVEL key is to uched o nce, will be displayed. If you miss yo ur desired
level, co ntinue to uching the MICROWAVE POWER LEVEL key until yo u reach the level ag ain.
• If the level is not selected, the level 900 W (100 %) is automatically set.
x3
x3
x5
270 WATT = 30 % output
90 WATT = 10 % output
R-852 ENGLISH 5/5/99 2:05 pm Page 8
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
