Sharp RZ-X650

5
LCD brightness control
For adjustment of the screens brightness. (increase / decrease)
5
Magnetic Strip Reader(Optional)
For reading magnetic stripe cards.
6
Rear/IO Ports view
1 2 3 4 5 6 7 8
9
10
Serial Port 1, 2, 3
Connects serial devices such as a customer display, a barcode scanner, or a receipt printer
that use serial interface to the serial ports.
1
VGA Connector
Connects VGA signal cable from a 2
nd
monitor
2
Note:
•
DefaultvoltageatPin9ofCOM2/COM3is5V.Forfurtherinformation,pleasecontact
yourauthorizedSHARPdealer.