Sharp UP-3515 User Manual

POS TERMINAL
INTER-REGISTER
COMMUNICATION SYSTEM
INSTRUCTION
MANUAL
MODEL
UP-3515

Sharp UP-3515 Specifications

General

Brand	Sharp
Model	UP-3515
Category	Touch terminals
Language	English

Summary

3 IRC Programming

1. Setting the machine numbers – master and satellite

Setting machine numbers for master and satellites before programming.

2. Setting the terminal numbers (IRC machine numbers) for satellites

Setting terminal numbers for satellites in the IRC system.

3. Initial setting for the master and master list creating/updating

Creating and updating the master list for IRC system terminals.

4. Specifying the terminal to serve as a back-up master – master

Assigning a satellite as a backup master if the primary master fails.

5. Specifying whether to enable or disable the system retry function when a transmission error occurs – master and satellite

Configuring the system retry function for transmission errors.

6. Choosing whether to search the master or satellite first for the PLU/EAN code – satellite

Defining the search order for PLU/EAN codes at satellites.

7. Reading the contents of the IRC programming – master and satellite

Reading IRC programming settings from master and satellites.

8. Programming for the remote printer

Programming settings for remote printers in the IRC system.

9. Programming for the Manager Work Station (MWS) – master and satellite

Configuring the Manager Work Station (MWS) for IRC communication.

10. Reading the contents of the Manager Work Station (MWS) programming – master and satellite

Reading MWS programming configurations.

1 Inline Operation

1. Message display

Displays messages during inline communication and satellite machine numbers.

2 Consolidated and Individual Reports

1. Operating modes

Defines operating modes like X1/Z1, X2/Z2, and OPXZ.

5 Error Recovery

1. Manual clear operation

Forcibly clearing specific item memory to restore the system.