Sharp SD-AT1000 - Page 48

SD-AT1000
– 48 –
1 IN31 1ch input terminal 3.
2 IN32 2ch input terminal 3.
3 IN41 1ch input terminal 4.
4 IN42 2ch input terminal 4.
5* IN51 1ch input terminal 5.
6* IN52 2ch input terminal 5.
7 IN61 1ch input terminal 6.
8 IN62 2ch input terminal 6.
9 IN71 1ch input terminal 7.
10 IN72 2ch input terminal 7.
11 IN81 1ch input terminal 8.
12 IN82 2ch input terminal 8.
13 INDVDSR DVD surround Rch input terminal.
14 INDVDSL DVD surround Lch input terminal.
15 INDVDC DVD center speaker input terminal.
16 INDVDSW DVD subwoofer input terminal.
17 OUT2(+) 2ch (+) A/D output terminal.
18* OUT2(-) 2ch (-) A/D output terminal.
19 OUT1(+) 1ch (+) A/D output terminal.
20* OUT1(-) 1ch (-) A/D output terminal.
21 IN1DSP 1ch DSP input terminal.
22 IN1MIX 1ch DSP MIX input terminal.
23 IN2DSP 2ch DSP input terminal.
24 IN2MIX 2ch DSP MIX input terminal.
25 INDSPSR DSP surround Rch input terminal.
26 INDSPSL DSP surround Lch input terminal.
27 INDSPC DSP center speaker input terminal.
28 INDSPSW DSP subwoofer input terminal.
29 AGND1 Analog ground terminal.
30 GOUTSW Subwoofer input gain output terminal.
31 VINSW Subwoofer volume input terminal.
32 AGND2 Analog ground terminal.
33 GOUTC Center speaker input gain output terminal.
34 VINC Center speaker volume input terminal.
35 OUTSW Subwoofer output terminal.
36 OUTC Center speaker output terminal.
37 OUTSL Surround Lch output terminal.
38 OUTSR Surround Rch output terminal.
39 VINSL Surround Lch volume input terminal.
40 GOUTSL Surround Lch input gain output terminal.
41 AGND3 Analog ground terminal.
42 VINSR Surround Rch volume input terminal.
43 GOUTSR Surround Rch input gain output terminal.
44 AGND4 Analog ground terminal.
45 DGND Ground terminal for comparator.
46 DA Serial data and latch input terminal.
47 CL Serial clock input terminal.
48 MUTE Mute terminal.
49 AGND5 Analog ground terminal.
50 VEE (-) Power supply terminal.
51 AGND6 Analog ground terminal.
IC501 VHiBD3811K1-1: Volume IC (BD3811K1) (1/2)
Terminal Name
Pin No.
Function
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.