To Next PageTo Next PageWhy is there no sound coming from my Sharp Home Theater System?
There might be several reasons for the lack of sound. Ensure the input signal is properly set and the volume level is adjusted above 'MIN'. Also, deactivate muting if it's on. Verify that you are using HDMI compliant equipment and that the HDMI cable is correctly connected. If problems persist, perform the reset procedure.
What to do if the Sharp Home Theater System remote control does not operate properly?
If the remote control isn't working, check the following: ensure the battery polarity is correct and replace the battery if it's dead. Make sure you're using the remote within the proper distance and angle, and that there are no obstructions in front of the sound bar or strong light shining on the remote sensor. Also, verify that you're using the remote for the correct equipment, and if not, connect the remote control with the sound bar.
Why is my Sharp Home Theater System wireless connection not working?
A wireless connection might fail due to obstacles, especially metal, blocking the signal between the sound bar and subwoofer. Also, the distance between the sound bar and subwoofer might be too far. Try to manually re-link the sound bar and subwoofer, and ensure they are less than 32 feet (10 meters) apart.
What to do if my Sharp Home Theater System sound bar cannot be turned on with the remote control?
If the sound bar doesn't turn on with the remote, check if the AC power cord of the sound bar is plugged in and the battery is inserted in the remote. Also, make sure that the remote control is connected with the sound bar.
Why is the Bluetooth sound interrupted or distorted on my Sharp Home Theater System?
Bluetooth sound issues can arise if the unit is too close to devices emitting electromagnetic radiation or if there's an obstacle between the unit and the Bluetooth stereo audio source device. Try moving the unit away from such devices and remove any obstacles.
What to do if the sound from the subwoofer is not well balanced in my Sharp Home Theater System?
If the subwoofer sound isn't balanced, it might be because the subwoofer level is set too high or too low. Adjust the subwoofer level to correct this.
What to do if my Sharp Home Theater System power turns off suddenly?
If the power suddenly turns off, ensure the HDMI cable is correctly connected, and then perform the reset procedure.
What to do if my NFC-enabled device cannot connect to Bluetooth via NFC tag on my Sharp Home Theater System?
If your NFC-enabled device isn't connecting, the sound bar might not be in Bluetooth pairing mode. Perform 'NFC connection for audio playback'.
What should I do if the Sharp Home Theater System sound bar does not respond when a button is pressed?
If the sound bar isn't responding to button presses, set it to standby mode and then turn it back on.
Why is the power not turned on for my Sharp Home Theater System?
If the power isn't turning on, ensure the sound bar is plugged in. It's also possible the protection circuit has been activated. Unplug the power cord and plug it back in after 5 minutes or more.
General| Type | Sound Bar |
|---|---|
| Channels | 2.1 |
| Bluetooth | Yes |
| Optical Input | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Remote Control | Yes |
| Weight | 3.5 kg |
| HDMI | 1 x HDMI ARC |
