Charging
Charging
When you purchase the product, the internal battery is not fully charged. Be
sure to charge the internal battery before use.
•
If the performance of the battery does not recover (e.g. the usable time after
each charge has become extremely short), the internal battery may be at the
end of service life. On the home screen → “App list screen” → [Settings] →
[About phone] → [Status] → [Battery status] to check the charging
performance of the internal battery.
•
While charging, the charging/incoming indicator illuminates in red, and the
battery icon is displayed with superimposed. Even after charging (battery
level 100%), indicator remains lit in green if a specified charger (sold
separately) is connected.
◎ The product may become warm while charging, but this is normal.
◎ Depending on the operation procedure and usage environment, the
temperature inside the product may get high and the product may even
get heated. In such case, charging may stop for security reasons.
◎ Charging the internal battery while using the camera function etc. may
lengthen the charging time.
◎ If you perform various operations with a specified charger (sold
separately) connected to the product, charging/discharging may take
place repeatedly in a short time. Frequently charging the internal battery
shortens its service life.
◎ If you charge the internal battery when the battery has run out, the
charging/incoming indicator may not illuminate soon. However, charging
is in progress.
◎ If the charging/incoming indicator flashes in red, force the power off (▶
P. 11) and turn the product on again. If the indicator continues to flash,
stop charging the internal battery and contact an au shop or the Repair
and Delivery Service Center.
Charging with the Specified AC Adapter (Sold
Separately)
The followings are the explanation of how to connect TypeC Common AC
Adapter 01 (sold separately) to charge. For details on the specified AC
adapter (sold separately), refer to “Peripheral Devices” (▶P. 23).
1
Insert the power plug of TypeC Common AC Adapter 01
(sold separately) into a 100V AC outlet.
2
Insert the USB Type-C plug of TypeC Common AC Adapter
01 (sold separately) to the external connection jack of the
product in the direction of the arrow.
outlet
01 (sold separately)
External
connection jack
3
When charging is finished, pull out the USB Type-C plug of
TypeC Common AC Adapter 01 (sold separately) straight
from the external connection jack of the product.
4
Unplug the power plug of TypeC Common AC Adapter 01
(sold separately) from the outlet.
◎ Although you can charge the internal battery while the power is turned
on, charging time lengthens.
10
To Next Page
Loading...
Need help?
General
