EN - 12 -
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope.
The rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old installation position, all the moving objects (i.e.,
shelves, crisper…) should be taken out or fixed with bands in order to prevent the
shake.
Changing of Door Opening Direction
In case you need to change door-opening direction, please consult the domestic after
sales service.
(Only some models)
Replacing the Refrigerator Light Bulb
1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover (A) by pressing the
hooks placed both sides of the cover.
3. Change the present light bulb (B) with a new one (not
more than 15 W).
4. Place the light cover in its place and plug the unit.
B
A
PART 5.
To Next Page
Loading...
Need help?
General
