SERVICE MANUAL
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
CHAPTER 1. SPECIFICATION
CHAPTER 2. DESIGNATION OFVARIOUS PARTS
[1] EXTERNAL DESCRIPTION .......................... 2-1
[2] CONSTRUCTIONS........................................ 2-2
CHAPTER 3. DIMENTIONS
[1] OUTER DIMENTIONS AND
CLEARANCE ................................................. 3-1
[2] INNER DIMENTIONS .................................... 3-3
CHAPTER 4. LIST OF ELECTORICAL PARTS
CHAPTER 5. WIRING DIAGRAM
[1] WIRING DIAGRAM........................................ 5-1
[2] ELECTRIC ACCESSORIES LAYOUT ........... 5-2
CHAPTER 6. FAILURE DIAGNOSIS
[1] OUTLINE OF CONTROL............................... 6-1
[2] CHECK MODE OF DEFROST HEATER
(Forced Defrosting) ........................................ 6-1
[3] RE-SETTING OF MICROCOMPUTER AT
POWER FAILURE ......................................... 6-2
[4] DIAGNOSIS METHOD OF FAILURE............ 6-2
[5] CONVERSION TABLE .................................. 6-3
[6] CIRCUIT DIAGRAM OF MAIN PWB............. 6-4
CHAPTER 7. FUNCTIONS
[1] ADJUSTABLE TEMPERATURE
CONTROL..................................................... 7-1
CHAPTER 8. ASSEMBLING PROCEDURES OF
MAIN PARTS AND CAUTIONS
[1] F-LOUVER ASS'Y ......................................... 8-1
[2] R CONTROL COV. ASS'Y ............................ 8-4
[3] HOW TO REPLACE THE LAMP................... 8-6
[4] DEFROST HEATER ...................................... 8-7
CHAPTER 9. COOLING UNIT
[1] COOLING UNIT ............................................ 9-1
[2] LOCATION .................................................... 9-2
Parts Guide
TopPage
CONTENTS
No. S9633SE26ATUTT
Refrigerator-freezer
MODELS
SJ-D20N-SLG
SJ-D24N-SLG
SJ-D28N-SLG
SJ-D29N-SLG
SJ-D20N/D24N/D28N/D29N-SLG
Refer to "HFC-134a COOLING UNIT" Service Manual for handling this refrigerant.
To Next Page
Need help?
General
