Sharp SJ-X510GP2 - Control Panel; Sj-X510 Tp2, Sj-X550 Tp2, Sj-X600 Tp2

24
Control panel
SJ-X510TP2, SJ-X550TP2, SJ-X600TP2
Useful modes
Button Meaning Default setting
Extra cool
OFF
Express freezing
Express cool
Energy saving
Plasmacluster ON*
* The Plasmacluster automatically starts operating
when the refrigerator is powered on.
Controlling temperature
Button Meaning Default setting
Refrigerator
compartment
Freezer compartment
Door Alarm
• When the refrigerator door is
left open for over 1 minute, door
alarm sounds once, and again
after 1 minute.
• If the door is left open for
approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after closing
the door.
Note
• If you want to light up the
indicator, press “F” or “R”
button.
• If the refrigerator stops because
of power failure, the modes
except for Extra cool, Express
freezing and Express cool
operate the same way even
after the recovery from electrical
outage.
Operations of useful modes
Mode How to start Indication of “ON” How to cancel
Extra cool Press the mode button.
(Beep)
Lighting
Press the mode button. (Beep)
Turn off
Press the mode button. (Beep)
Turn off
Express
freezing
Press the mode button.
(Beep)
Lighting
Express
cool
Press the mode button for
3 seconds or more.
(Beep, beep, beep)
Flashing
Energy
saving
Press “Express freezing”
button fi rst for 3 seconds
(Beep, beep, beep). Hold
down “Express freezing”
button and press “R” button
for 3 seconds or more.
(Beep, beep)
Flashing
Press “Express freezing” button
fi rst for 3 seconds. Hold down
“Express freezing” button and press
“R” button for 3 seconds or more.
(Beep)
Turn off
Note
• Extra cool, Express freezing and Express cool are not available while Energy saving is ON (Beep Beep).
02_OM_TINS-C051CBRZ 21DT_EN.indd 2402_OM_TINS-C051CBRZ 21DT_EN.indd 24 24/1/2565 BE 14:3024/1/2565 BE 14:30