Sharp VC-90ET

VC-90ET
Jig Item Configuration
JiGDT-0001 a
Tension Gauge Adapter JiGADP003 a
Special Bladed Screwdriver jens |
B
Tension Band and Plate ;
Adjustment
Jig
JiGDRiVER-6
C
B
B
This is used for replacement of the
Drum
Replacing
Jig
VCR's
upper
drum.
This Jig is used with the tension
gauge. Rotary Transformer
Clearance Adjusting Jig.
This Screwdriver is used for
adjusting the guide roller height.
This Jig is used for adjusting the
tension band and tension plate.
This is used to screw down resin-
made parts: the specified torque is
5kg.
B
A
Torque Driver (5kq) JiGTD1200
JiGDRIVER1 10-7
15 | Box Driver
JiGDRIVER110-4 Al
Retaining Guide Height JiGGH-F18 ai
Adjustment Jig
jewore Jw |
NOTE:
Current JiGMA0001 contains Master Plane (JiGMP0001) and Disk Height Adjusting Jig
(JiGRHO001).
Even though new Disk Height Adjusting Jig GiGRH0002) covers greater height, this new Jig
(JiGRH0002) can be used for current JiGRH0001, but current Jig JiGRH0001) cannot be used as
JiGRH0002.
Master Plane (JiGMP0001) can be used with JiGRH0001 and JiGRH0002 as well.
This Jig is used for height
adjustment of the AVC head.
This Jig is used for height
adjustment of the retaining guide
and X-position.
This Jig is used for height
adjustment of the retaining guide.
G
K
p
8
V
U
U This Jig is used for height
Retaining Guide Height
adjustment of the reverse guide.
Adjustment Jig