17
If problems persist contact the SHARP Helpline on tel: 0990-274277
ADVANCED OPERATION
DIGITAL DISPLAY
TIME OF DAY
Shows current time of day, if the clock is set.
Press DISPLAY until the time of day appears. For
example, 21:20 appears:
OPERATION MODE
Shows status of tape. Press DISPLAY until the display
appears, for example:
TAPE COUNTER AND ZERO BACK
Tape counter measures the current position of the video tape in real time. ZERO BACK uses the
tape counter to determine a specific point on a tape you may wish to return to.
1. Press DISPLAY until tape counter appears, for
example:
2. To identify the current position on a video tape
press CLEAR and the tape counter will appear:
When you wish to return to this position on the video tape, press ZERO BACK. The tape will
rewind/advance to this point.
NOTE:
• The tape counter will only operate on recorded sections of tape.
Pr
To Next Page
Loading...
