Sharp VC-MH321HM - Page 14

BASIC OPERATION
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel! by pressing CHANNEL Ao V.
To change between single digit and 2-digit channel numbers, press Gi),
For example, for channel 24, press Giz) then press 2 4.
You can record the channel you are watching or a different channel.
1. Insert a video tape into your VCR.
2.Select the channel you wish to record on the VCR.
3.To start recording, press RECORD (@ ).
4.To pause during recording, press PAUSE/STILL (fff).
5.To continue recording, press RECORD (@).
6.To stop recording, press STOP once.
SIMPLE TIMED RECORDING:
1. To specify a stop time, press RECORD (@
2. Each additional press of RECORD (@)
will delay the stop time by 10 minutes.
3. To stop recording at any time, press
STOP (Mf ) once.
10