Sharp VC-MH321HM - Page 15

BASIC OPERATION
HOW TO USE VIDE
TO MAKE A RECORDING
» fA appears on the VCR display, press TIMER ON/OFF before starting.
¢ Check that the clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings.
1.Press [SV/V+/TIMER] on the remote
control.
2.Enter the VIDEOPLUS+ number from the TV
listing using the NUMBER BUTTONS.
3.Press [.a/W ] to select ONCE, WEEKLY, DAILY.
4.!f you want to make additional recordings at the same time each day or week, then use
[ </P> ] to select the WEEKLY, or DAILY option as appropriate.
5.Press SET to confirm.
The first time that you use VIDEOPLUS+ to
make a recording. on each channel Preset,
(PR) may-be highlighted on the menu.
6. Enter the channel you wish to record
using the NUMBER BUTTONS, for
example if you wish to record channel 2
press O 2. The VCR will remember this
for the future.
11