Sharp VC-MH321HM - Page 30

SPECIAL FEATURES ON YOUR VCR
LOW POWER FEATURE
To meet new power regulations your VCR can be placed in LOW POWER mode, In LOW
POWER mode the VCR power consumption is reduced to below 1 Watt.
LOW POWER MODE
1.Press STANDBY (() to place the VCR in STANDBY mode.
2.Press STANDBY (O) again to place the VCR in LOW POWER made. The VCR digital
display will appear blank.
The VCR power consumption will now be below 1 Watt.
DISENGAGING LOW POWER MODE
Either Press STANDBY (5) to return the VCR to STANDBY mode.
Or Press STOP (™ ) to use the VCR.
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in standby,
preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold @# on the remote control for about 2 seconds.
@w flashes and then ©w remains lit on the VCR display confirming that CHILD LOCK
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. !f CHILD LOCK is activated during playback, once the tape reaches its
end, the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold © for about 2 seconds.
©w starts flashing and then disappears. CHILD LOCK is disengaged.
26