Sharp ViewCam Slim VL-ME100S - Page 6

iii
Quick Operation Guide
Camera Recording on Tape
Lock button
REC
4 Hold down the Lock
button and set the
POWER switch to VCR.
2 Open the LCD monitor and adjust the
angle.
1/3
REW
DISP
60
min
PLAY/
STOP
ST I LL
FF
5 Touch [REW] or [FF] to rewind or fast
forward the tape to the desired point.
Lock button
3 Set the Media Selection
switch to TAPE.
Tape Playback
1
Make sure that the recorded Mini DV
cassette is inserted.
1/3 DISP
60
min
/
1/3
REW
DI
PLAY/
STOP
ST I LL
FF
6 Touch [PLAY/STILL] to begin playback.
To stop playback
Touch [b] (Stop).
1 Make sure that a Mini DV cassette is
inserted.
2 Remove the lens cap. Pull out the
viewfinder completely or open the LCD
monitor.
3 Set the Media Selection
switch to TAPE.
4 Hold down the Lock
button and set the
POWER switch to
CAMERA.
5 Press the Power Zoom T (Telephoto) or
W (Wide angle) button to zoom in on or
out from the subject.
Power Zoom buttons
Media Selection switch
REC START/STOP button
POWER switch
To pause recording
Press the REC START/STOP button again.
6 Press the REC START/STOP button to
begin recording.
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.