11
1. Remove the screw holding the body with the back cover.
2. Lift the body first at the bottom.
3. Now the body is free.
REMOVE OF BODY
Fig. 21
Body
Screw
Back cover
1. Remove the body in accordance with “REMOVE OF BODY”.
2. Remove 2 screws holding the micro SW. with the Push SW. housing.
3. Remove 2 screws holding the Push SW. ass’y with the back cover.
4. Now the Push SW. ass’y is free.
REMOVE OF PUSH SWITCH ASS’Y
Screw
Back cover
Push SW. knob
Push SW. housing
Micro SW.
Screw
Fig. 23
Fig. 22
REMOVE OF TRIAC
Triac
Screw
Triac lead wire brown
White lead wire
Breaker lead wire
Red lead wire
Back cover
Heater tank
1. Remove the body in accordance with
“REMOVE OF BODY”.
2. Disconnect 3 lead wires from the triac.
3. Remove 2 screws holding with the
heater tank ass’y.
4. Now the triac is free.
To Next Page
Loading...
