a
91
5. Insert the two new batteries on top of the ribbon tab, taking
care to position them correctly according to the plus (+)
and minus (-) terminals, as shown below.
6. Replace the cover.
7. Set the battery replacement switch to NORMAL
OPERATION.
If nothing happens when you press [ON]:
* Setting the battery replacement switch to REPLACE
BATTERIES shuts off power to the unit. Check that the
battery replacement switch is set to NORMAL
OPERATION.
* Repeat the above battery replacement procedure step by
step.
* After following the above battery replacement procedure,
the LCD contrast setting which is set by user will be back
to its default mode.
NORMAL OPERATION
REPLACE BATTERIES
RESET
To Next Page
Loading...
