16
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
When connecting equipment other than a computer, see
pages 22 and 23.
3. Remove the lens cap and turn the projector on
2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
On the projector On the remote control
KEYSTONE button
INPUT buttons
STANDBY/ON
button
HEIGHT
ADJUST lever
Focus ring
STANDBY button
_PP. 21, 24
_P. 25
ENTER button
ENTER button
6
4
3
5
8
3
5
6
8
KEYSTONE
button
4
4
ON button
COMPUTER button
4
1. Place the projector facing a wall or a screen
_P. 18
5
Adjustment buttons
(P/R/O/Q)
5
Adjustment buttons
(P/R/O/Q)
Zoom ring
4
To Next Page
Loading...
Need help?
General
