Sharp XR-30X User Manual

36
“Projector adjustment (PRJ-ADJ)” menu
Auto Power Off
System Sound
System Lock
h
On
On
Auto Restart On
STANDBY Mode Standard
0 min0Lamp Timer(Life) 100%
Picture SCR - ADJ PRJ - ADJ Help
SEL./ADJ. ENTER END
Speaker On
Audio Input Audio 1
RS-232C 9600bps
Fan Mode Normal
Disable
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
Picture SCR - ADJ PRJ - ADJ Help
Main menu Sub menu
PRJ - ADJ
Page 43
STANDBY Mode
System Sound [On/Off]
Speaker [On/Off]
System Lock
[Enable/Disable]
Lamp Timer(Life)
Page 43
Auto Restart [On/Off]
Page 43
Auto Power Off [On/Off]
Page 43
Page 43
Page 43
Page 44
Page 44
Fan Mode
Page 44
Normal
High
RS-232C
Page 44
9600bps
115200bps
Audio Input
Page 43
Audio 1
Audio 2
Standard
Eco
“Help” menu
The items you can set with the “Help”
menu
“Help” menu n Page 46
•Vertical stripes or flickering image appear
Auto Sync
Clock
Phase
• Data image is not centered
Auto Sync
H-Pos
V-Pos
• Color is faded or poor
COMPUTER/COMPONENT or DVI input
Signal type: Auto/RGB/Component
S-VIDEO or VIDEO input
Video System: Auto/PAL/SECAM/
NTSC3.58/NTSC4.43/
PAL-M/PAL-N/PAL-60
DVI input
Dynamic range: Auto/Standard/Enhanced
* The selectable items vary depending on the in-
put signal and the selected input mode.
Menu Items (Continued)

Sharp XR-30X Specifications

General

Brand	Sharp
Model	XR-30X
Category	Projector
Language	English