2 Camera (optionally available)
Make sure that the label on the card “SHARP CE-AG06 DIGITAL CAMERA
CARD” is facing up when you insert it.
Caution:
• Be sure to remove the Display protection cover before inserting the card.
• While the Digital camera Card is attached to the unit, the stylus cannot be
removed and inserted, because the card covers the stylus holder.
• Do not hold the card when moving the unit with the card inserted or wield it by
holding the card. Otherwise, the card will be removed from the unit and/or the
card will fall and get damaged.
• Do not pull out or push the card forcefully while using the camera. Otherwise,
the unit or card will be damaged.
Removing the Digital Camera Card
1.
Be sure all applications are closed before removing the card.
If any applications are open, tap to close them.
2.
While the card is inserted, tap the CF card icon on the taskbar in the bottom
right-hand corner of the screen.
The pop-up menu will appear.
3.
Tap “Eject card.”
The CF card icon will disappear.
Now you are ready to remove the Digital Camera Card from the CF card slot.
4.
Remove the Digital Camera Card straight out.
Note:
Remove the Digital Camera Card in the same way as the expansion
memory card. For details, also see the separate Start-up Guide.
To Next Page
Loading...
Need help?
General
