my Zaurus SL-C3000 and SL-C3100 http://www.users.on.net/~hluc/myzaurus/
109 of 212 16/09/2007 12:23
Once Wellenreiter is installed, create a network profile for it as follows:
Account
Name: wellenreiter
Config
Non-Spec ESS-ID: "ANY" (unticked)
ESS-ID: test
Network Type: 802.11 Ad-Hoc
WEP
Key Type: Disabled
PPoE
Use PPoE Authentication (unticked)
WEB Auth
Use WEB Authentication (unticked)
TCP/IP
Obtain TCP/IP information Automatically (unticked)
IP Address: 1.1.1.1
Subnet Mask: 255.255.255.0
Gateway: 1.1.1.0
DNS
Auto-detect name servers (ticked)
Default domain: (leave empty)
Proxy
No proxy
Connect to this network and then start wellenreiter.
Installing Kismet
You need to install the following packages:
libstdc6 - [libstdc6_1.2.2_arm.ipk]
libpcap - [libpcap0_0.7.2-20031220_arm.ipk]
kismet - [kismet_2005.08.R1_arm.ipk] (contained in kismet-2005-08-R1-arm.tar.gz)
kismet-qt - [kismet-qt_2.0.0_arm.ipk]
kismet-misc - [kismet-misc_0.3_arm.ipk]
netctl - [netctl_0.3.0-1_arm.ipk]
Once you have installed the packages, you need to do the following first if you have a C3000 :
# su
# mkdir -p /home/root/usr
# ln -s /opt/QtPalmtop/lib /home/root/usr/lib
To Next Page
Loading...
