my Zaurus SL-C3000 and SL-C3100 http://www.users.on.net/~hluc/myzaurus/
129 of 212 16/09/2007 12:23
Installing Gnumeric
The gnumeric and related packages from pdaXrom also work under X/Qt. However, you will need to
install several packages to get gnumeric working. The following packages are required:
bzip2_1.0.2-1_armv5tel.ipk
expat_1.95.7-1_armv5tel.ipk
gconf_2.4.0.1-1_armv5tel.ipk
gnome-base-libs_2.4.0-1_armv5tel.ipk
gnome-vfs_2.5.3-1_armv5tel.ipk
gnumeric_1.2.2-1_armv5tel.ipk
libart-lgpl_2.3.16-1_armv5tel.ipk
libbonobo_2.4.2-1_armv5tel.ipk
libbonoboui_2.4.2-1_armv5tel.ipk
libglade_2.0.1-1_armv5tel.ipk
libgnome_2.4.0-1_armv5tel.ipk
libgnomecanvas_2.5.1-1_armv5tel.ipk
libgnomeprint_2.4.2-1_armv5tel.ipk
libgnomeprintui_2.4.2-1_armv5tel.ipk
libgnomeui_2.4.0.1-1_armv5tel.ipk
libgsf_1.8.2-1_armv5tel.ipk
libpopt_1.0.0_armv5tel.ipk
orbit2_2.9.2-1_armv5tel.ipk
Alternatively, I have build a gnumeric package [gnumeric_1.2.2-1_arm.ipk] which includes the
above packages.
Once installed you can launch gnumeric as follows:
# xlauncher gnumeric
To Next Page
Loading...
