If the unit makes noise during operation, a thorough cleaning of
the grid and ionizing wires may be required.
Remove the collection grid by
pulling it from the top of the unit.
Wash the grid with warm soapy
water, rinse and allow to dry for
24 hours before returning to unit.
Use a compressed gas dusting
product to remove any accumu-
lated particles from the ionizing
wires and to blow out any dust
that is settled in the base of the
unit. (Because of the dust, it is
advisable to do this outside.) The
Professional Series™ Ionic Breeze
GP
®
also features a rear grill that
slides off for easy cleaning.
Thorough Cleaning
14
To Next Page
Loading...
