EasyManua.ls Logo

Sharper Image RISE 20H - User Manual

Sharper Image RISE 20H
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
READ AND SAVE
THESE INSTRUCTIONS
MODEL
RISE 20H
TOWER HEATER
OWNER’S GUIDE

Table of Contents

Questions and Answers

  • L
    lynnperryJul 28, 2025
    What to do if my Sharper Image RISE 20H Heater fails to power on?
    • N
      Neil RossJul 28, 2025
      If your Sharper Image Heater doesn't turn on, check the following: * Make sure the power cord is plugged into an electrical outlet. * Check if the household circuit breaker has tripped or a fuse has blown; reset the breaker or replace the fuse if needed. * Relocate the unit to a standard wall outlet if the ground fault circuit interrupter (GFCI) has tripped. * Place the heater on a level surface to ensure the tip-over switch on the bottom isn't tripped.
  • G
    Glenn MooreAug 6, 2025
    Why is my Sharper Image Heater not producing enough heat?
    • A
      Amy WalkerAug 7, 2025
      If your Sharper Image Heater isn't producing enough heat, make sure it is set to High Heat. Also, close all doors and windows to trap heat, and allow the unit several minutes to fully heat the room.
  • T
    Tracy KingAug 18, 2025
    What to do if my Sharper Image RISE 20H Heater is powered on but there is no heat?
    • R
      Roger BautistaAug 18, 2025
      If your Sharper Image Heater is on but not producing heat, ensure that the thermostat dial is turned clockwise if in Auto Mode. If the problem persists in Continuous Mode, cease usage and unplug the unit.

Summary

Important Safety Instructions

Intended Use

Safety Features

Cool-Touch Cabinet

Outer housing remains safe to touch even on high heat settings.

Automatic Safety Shut Off System

Shuts off power if airflow becomes blocked, preventing overheating.

Automatic Tip-Over Protection

Cuts power if the heater tips over; power restored when upright.

Controls Overview

Adjustable Thermostat

Fan Mode Selection

Power On;Off Switch

How to Use

Reset Heater

Resetting the Safety Shut-Off

Procedure to reset the heater after overheating or safety shut-off.

Troubleshooting

Unit Fails to Power On

Insufficient Heat Output

No Heat Produced

Sharper Image RISE 20H Specifications

General IconGeneral
Remote ControlYes
OscillationYes
Voltage120V
Fan Assisted HeatingYes
Heating Power1500 W
ThermostatYes
Safety FeaturesOverheat protection, tip-over switch
TimerUp to 12 hours
Heating MethodCeramic
Heater TypeCeramic Tower
Height23.6 inches

Related product manuals