5. Adjust the volume of the unit to achieve a good balance
between the high and midrange output of the stereo system
and the bass output of the subwoofer.
6. After this initial adjustment, the output of the unit automatically
tracks the volume adjustments of the stereo system.
To maximize the bass output, we recommend placing the sub-
woofer in the corner of the room whenever possible.
Troubleshooting
No operation
•Check the AC plug. Reconnect if necessary.
•Make sure the unit is on. Blue LED will illuminate if the unit is on.
No output or low output
•Check the RCA cable. Reconnect if necessary.
•Check the speaker wire connections, paying attention to the
polarity of the connections. Reconnect if necessary.
Operation
20
To Next Page