Sharper Image SR407 - Attaching Handles and Resistance Cords; Connecting Components

Please read instructions carefully before attaching handles. Make
sure all nuts and bolts are securely tightened.
1. Locate metal loops near the toes of each footpad. Attach
resistance cords to loops with hinged metal clips found on
the end of both cords.
2. Attach individual handles or long handlebar to ends of resist-
ance cords with metal clips.
Attaching Handles
Handle (1)
Handlebar (2)
Hook
Hook
Resistance Cord
The product herewith complies with the requirements of the EMC Directive 89/336/EEC
and carries the “CE” mark accordingly.