Shelly Plug S User And Safety Manual

Contents [ hide
1 Specification
2 Technical Information
3 Introduction to Shelly
4 Installation
Instructions
5 Factory Reset
6 File Downloads
7 References
8 Related Manuals
Specification
Power supply: 110-230V ±10% 50/60Hz AC
Max load: 12A / 230V, 50/60Hz
Complies with EU standards: RE Directive
2014/53/EU, LVD 2014/35/EU, EMC 2014/30/EU, RoHS2 2011/65/EU
Working temperature: -20°÷40 °C
Radio signal power: 1mW
Radio protocol: WiFi 802.11 b/g/n
Frequency: 2412-2472 MHz(max. 2483.5 MHz);
Operational range: up to 50 m outdoors or up to 30 m indoors
Dimensions (HxWxL): 70x44x 44 mm.
Electrical consumption: < 1W
SAR: 1.15 W/Kg
Technical Information
• Control through WiFi from a mobile phone, PC, automation system or any other Device supporting HTTP and/or
UDP protocol.
• Microprocessor management.
⚠CAUTION! Danger of electrocution. Connecting the device to the power grid has to be performed with caution.
⚠CAUTION! Do not allow children to play with the device, especially with the Power Button. Keep the devices for
remote control of Shelly (mobile phones, tablets, PCs) away from children.
Introduction to Shelly
Shelly® is a family of innovative Devices, which allow remote control of electric appliances through mobile phones,
PC or home automation systems. Shelly® uses WiFi to connect to the devices controlling it. They can be in the same
WiFi network or they can use remote access (through the Internet). Shelly® may work standalone, without being
managed by a home automation controller, in the local WiFi network, as well as through a cloud service, from
everywhere the User has Internet access. Shelly® has an integrated web server, through which the User may adjust,
control and monitor the Device. Shelly® has two WiFi modes – access Point (AP) and Client mode (CM). To operate
in Client Mode, a WiFi router must be located within the range of the Device. Shelly® devices can communicate
directly with other WiFi devices through HTTP protocol. An API can be provided by the Manufacturer.
Shelly® devices may be available for monitor and control even if the User is outside the range of the local WiFi
network, as long as the WiFi router is connected to the Internet. The cloud function could be used, which is activated
through the web server of the Device or through the settings in the Shelly Cloud mobile application.
The User can register and access Shelly Cloud, using either Android or iOS mobile applications, or any internet
browser and the website: https://my.Shelly.cloud/.
Installation Instructions
⚠ CAUTION! Danger of electrocution. Even when the device is turned off, it is possible to have voltage across its
clamps.

Shelly Plug S Specifications

General

Frequency range	2.4 - 2.5 GHz
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wireless technology	Wi-Fi
Connectivity technology	Wireless
Best uses	Home
Certification	RE Directive 2014/53/EU LVD 2014/35/EU EMC 2004/108/WE RoHS2 2011/65/UE
Product color	White
Placement supported	Indoor
Maximum indoor range	30 m
Maximum outdoor range	50 m
Maximum current	12 A
AC input voltage	110 - 230 V
AC input frequency	50 - 60 Hz
Maximum input power	2500 W
Operating temperature (T-T)	-20 - 40 °C
Mobile operating systems supported	Android 4.2, Android 4.2.1, Android 4.2.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1, Android 6.0, Android 7.0, Android 7.1, Android 7.1.2, Android 8.0, Android 9.0, iOS 10.0, iOS 11.0, iOS 11.4, iOS 12, iOS 13, iOS 8.0, iOS 8.1, iOS 8.2, iOS 8.3, iOS 8.4, iOS 9.0, iOS 9.1, iOS 9.2, iOS 9.3

Weight and Dimensions

Depth	70 mm
Width	44 mm