EasyManua.ls Logo

Shengmilo MX01 - Safety Precautions

Shengmilo MX01
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Safety Precautions
The following safety notes provide additional information on the safe operation of your Shengmilo MX01 and should be closely reviewed. Improper operation or failure to confirm correct installation,
compatibility, and maintenance of any component or accessory may result in serious injury or death.
Before Riding
All users must read and understand this manual before first use. Additional manuals for components used on your bicycle may be provided and should also be read before use.
Ensure you understand all instructions and safety notes/warnings.
Follow the safety checklist on page 19 before first use and at regular intervals to ensure correct tightening and setup of your bicycle.
Ensure the bike fits you properly before first use. Check local rules and regulations before riding.
It is your responsibility to familiarize yourself with the laws and requirements of operation of this product in the area(s) where you ride.
While Riding
Always wear an approved bicycle helmet whenever using this product and ensure that all helmet manufacturer instructions are used for fit and care of your helmet. Failure to wear a helmet when
riding may result in serious injury or death.
Acceleration can be unexpectedly strong in pedal assist mode (Pedal Assist level 1-5), as when you pedal the motor assist will suddenly engage. Therefore, please pay careful attention when
riding. We suggest you use Pedal Only Mode (Pedal Assist level 0) when you need to ride at a slow speed to cross roads, at intersections, or when pedestrian traffic is present, in order to avoid
accidents caused by sudden acceleration.
Make sure you securely close the quick-release lever of the front wheel, checking the wheel balance in Pedal Only Mode. If you notice the riding feels imbalanced, or the rotation of the front
wheel makes noise, it likely means the bolts were not completely tightened or didn’t align horizontally in the center.
Off-road riding requires close attention and specific skills, and presents variable conditions and hazards which accompany the conditions.
Wear appropriate safety gear and do not ride alone in remote areas.

Related product manuals