Step 6: Install the headlight as shown in the assembly video available at www.shengmilo-bikes.com .
A. Remove the fender and headlight mounting bolt from the fork arch and set aside.
B. Place the fender in position. From the back of the front tire, pass the front fender
mounting point under the front fork arch.
C. Install the headlights. Only need to turn 3 screws to quickly fix the position.
Install the headlights to the front wheel fenders
D. Adjust the headlight angle to illuminate the road ahead and not blind oncoming traffic. Use a 5 mm Allen wrench and 5
mm wrench to loosen the headlight angle adjustment bolt, tilt the headlight to the optimal position, and then tighten in
place securely.
To Next Page
Loading...
