• Store under shelter and in an upright position; avoid leaving the bike in the rain or exposed to corrosive substances such as water, salt, or de-icing
substances. If exposed to rain, dry your bike afterward, and apply an anti-rust treatment to the chain and other unpainted steel surfaces.
• To clean your ebike, turn the bike and battery off and wipe the frame with a clean, damp cloth. If needed, apply a mild, non-corrosive detergent
mixture to the damp cloth and wipe the frame. Dry by wiping with a clean, dry cloth. Never use high-pressure water on your bike. Wipe down your
bike frequently and wipe or spray all unpainted mechanical parts with anti-rust treatment.
• If painted metal parts become scratched or chipped, use touch up paint or nail polish to prevent rust.
• Never immerse or submerge the bike or any components in water or liquid, which can damage the electrical system.
• Avoid riding on the beach, in coastal areas with high-salinity fog, or on surfaces treated with salt or de-icing compounds. Doing so exposes your
bike to salt or other substances that are very corrosive. Corrosion of electrical components can lead to permanent, irreversible damage that can
cause battery failure, electrical system failure, or electrical fire. Damage from corrosion is not covered under warranty.
WARNING： Damage to your ebike's electrical system caused in any manner, including water intrusion, can lead to
battery failure, electrical system malfunction, or electrical fire and consequent property damage, injury, or death. Follow all
recommendations to minimize chance of water damage. If you have any questions, contact Shengmilo Product Support.
To Next Page
Loading...
