WARNING: Using a damaged battery or charger can create additional bike damage or a fire hazard. Stop using your battery and
charger and contact Shengmilo immediately if any of the following occur: (1) Your charger's flexible power cord or output cable or any
of the electrical cables on your bike is frayed, has broken insulation, or any other signs of damage, (2) Your battery or charger is physically damaged,
non-functional, or performing abnormally, (3) Your battery or charger experienced a significant impact from a fall or crash, with or without obvious
signs of damage, or (4) Your charger becomes too hot to touch (it's designed to get warm with normal use), makes a funny smell, or shows other signs
of overheating. Store any damaged battery or charger in a safe location and, as soon as possible, recycle or otherwise dispose of it according to local
rules. Contact Shengmilo if you have any questions or to purchase a compatible replacement battery or charger.
How the electrical system works
This ebike is equipped with two ways for a rider to use power assistance from the motor to propel the bike forward: a pedal assist system (PAS) and a
half twist throttle.
HOW PEDAL ASSIST WORKS
The rider can engage the pedal assist system (PAS)while pedaling, and it will call up assistance from the motor to help propel the bike forward.
Pedal assist uses a cadence sensor built into the drivetrain of the bike. The sensor detects when the rider revolves the pedals and signals the electric
motor to provide the level of pedal assistance that has been selected.
HOW THE THROTTLE WORKS
The throttle is located on the right side of the handlebar. The rider can use it with a twist of the throttle grip to propel the bike forward without pedaling.
To Next Page
Loading...
